–7–
EBA00011
YFA1S
SETUP AND PREDELIVERY CHECKLIST
NOTE:
_
Check the following items again after setup and predelivery service have been completed.
A: INSTALLATION OF THE PARTS INCLUDED IN THE CRATE
Ã
Front wheels
Ã
Rear bumper
Ã
Rear wheels
Ã
Tail/brake light lens unit
Ã
Handlebar
Ã
Rear fender flaps
Ã
Throttle housing
Ã
Fender stays
Ã
Front brake cable
Ã
Swingarm guard
Ã
Rear brake cable
Ã
Owner’s tool kit
Ã
Headlight
Ã
Owner’s manual
Ã
Cable ties (handlebar)
Ã
Battery
Ã
Handlebar cover
Ã
Seat
Ã
Fuel tank breather hose
Ã
Front reflectors
Ã
Front bumper
Ã
Rear reflectors
Ã
Front panel
B:TIGHTENING TORQUE OF EACH PART
Ã
Front wheel and front wheel hub
55 Nm (5.5 m · kg, 40 ft · lb)
Ã
Rear wheel hub and rear axle
120 Nm (12 m · kg, 85 ft · lb)
Ã
Handlebar holder and steering column
20 Nm (2.0 m · kg, 14 ft · lb)
Ã
Throttle housing and bracket
4 Nm (0.4 m · kg, 2.9 ft · lb)
Ã
Headlight and steering column
7 Nm (0.7 m · kg, 5.1 ft · lb)
Ã
Front bumper and frame
23 Nm (2.3 m · kg, 17 ft · lb)
Ã
Front panel and frame (bolt)
7 Nm (0.7 m · kg, 5.1 ft · lb)
Ã
Front panel and frame (screw)
4 Nm (0.4 m · kg, 2.9 ft · lb)
Ã
Rear bumper and frame
23 Nm (2.3 m · kg, 17 ft · lb)
Ã
Rear bumper and tail/brake light bracket
7 Nm (0.7 m · kg, 5.1 ft · lb)
Ã
Tail/brake light lens unit and tail/brake light bracket 7 Nm (0.7 m · kg, 5.1 ft · lb)
Ã
Rear fender flap and rear fender
4 Nm (0.4 m · kg, 2.9 ft · lb)
Ã
Fender stay and frame
7 Nm (0.7 m · kg, 5.1 ft · lb)
Ã
Fender stay and rear fender
4 Nm (0.4 m · kg, 2.9 ft · lb)
Ã
Swingarm guard and swingarm
23 Nm (2.3 m · kg, 17 ft · lb)
C: ROUTING OF WIRE, CABLES, ETC.
Ã
Throttle cable
Ã
Rear brake light switch lead
Ã
Front brake cable
Ã
Fuel tank breather hose
Ã
Rear brake cable
Ã
Tail/brake light lead
Ã
Headlight leads
Ã
Battery breather hose
Ã
Handlebar switch lead
Ã
Battery positive lead
Ã
Front brake light switch lead
Ã
Battery negative lead
