manualshive.com logo in svg

Yamaha BLASTER YFS200P, Owner'S Manual

Share
Download
Yamaha BLASTER YFS200P Owner'S Manual Download Page 75

Exhaust system

The exhaust system on the ATV is very hot dur-

ing and following operation. To prevent burns,

avoid touching the exhaust system. Park the

ATV in a place where pedestrians or children

are not likely to touch it.

7-15

POTENTIAL HAZARD

Hot exhaust system.

WHAT CAN HAPPEN

Dry grass or brush or other combustible

material accumulated around the engine

area could catch fire. Someone touching

the exhaust system during or after opera-

tion could be burned.

q

WARNING

HOW TO AVOID THE HAZARD

Do not operate, idle, or park the ATV in dry

grass or other dry ground cover.

Keep the engine area free of dry grass,

brush, or other combustible material. Do

not touch the hot exhaust system. Do not

park the ATV in a place where others might

be likely to touch it.

Summary of Contents for BLASTER YFS200P





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands