manualshive.com logo in svg

Yamaha BLASTER YFS200P, Owner'S Manual, Page: 43 / 156

Share
Download
Yamaha BLASTER YFS200P Owner'S Manual Download Page 43

5-4

Gasohol

There are two types of gasohol; gasohol con-

taining ethanol and that containing methanol.

Gasohol containing ethanol can be used if

ethanol content does not exceed 10%. Gasohol

containing methanol is not recommended by

Yamaha because it may cause fuel system

damage or vehicle performance problems.

1. Filler tube

2. Fuel level

POTENTIAL HAZARD

Improper care when refueling.

WHAT CAN HAPPEN

Fuel can spill, which can cause a fire and

severe injury.

Fuel expands when it heats up. If the fuel

tank is overfilled, fuel could spill out due

to heat from the engine or the sun.

HOW TO AVOID THE HAZARD

Do not overfill the fuel tank. Be careful not

to spill fuel, especially on the engine or

exhaust pipe. Wipe up any spilled fuel

immediately. Be sure the fuel tank cap is

closed securely.

Do not refuel right after the engine has

been running and is still very hot.

q

WARNING

Summary of Contents for BLASTER YFS200P





























































































































































Reviews:

No comments