manualshive.com logo in svg

Yamaha BLASTER YFS200P, Owner'S Manual

Share
Download
Yamaha BLASTER YFS200P Owner'S Manual Download Page 42

EBU00129

Fuel

Make sure there is sufficient gasoline in the

tank.

Your Yamaha engine has been designed to use

premium unleaded gasoline with a pump octane

number ([R+M]/2) of 90 or higher, or research

octane number of 95 or higher. If knocking or

pinging occurs, use a different brand of gaso-

line. Unleaded fuel will give you longer spark

plug life and reduced maintenance cost. If

unleaded gasoline is not available, then leaded

premium gasoline can be used.

5-3

POTENTIAL HAZARD

Riding with improperly operating brakes.

WHAT CAN HAPPEN

You could lose braking ability, which

could lead to an accident.

HOW TO AVOID THE HAZARD

Always check the brakes at the start of

every ride. Do not ride the ATV if you find

any problem with the brakes. If a problem

cannot be corrected by the adjustment

procedures provided in this manual, have

the ATV inspected by a Yamaha dealer.

q

WARNING

Recommended fuel:

PREMIUM UNLEADED FUEL

Fuel tank capacity:

Total: 9 L (1.98 Imp gal, 2.38 US gal)

Reserve: 2.0 L (0.44 Imp gal, 0.53 US gal)

Summary of Contents for BLASTER YFS200P





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands