manualshive.com logo in svg

Yamaha BLASTER YFS200P, Owner'S Manual, Page: 103 / 156

Share
Download
Yamaha BLASTER YFS200P Owner'S Manual Download Page 103

8-2

The service information included in this manual is
intended to provide you, the owner, with the nec-
essary information for completing your own pre-
ventive maintenance and minor repairs. The tools
provided in the Owner’s tool kit are sufficient for
this purpose, except that a torque wrench is also
necessary to properly tighten nuts and bolts.

NOTE:

If you do not have a torque wrench available

during a service operation requiring one, take

your machine to a Yamaha dealer to check the

torque settings and adjust them as necessary.

POTENTIAL HAZARD

Operating this ATV with improper modifi-

cations.

WHAT CAN HAPPEN

Improper installation of accessories or

modification of this vehicle may cause

changes in handling which in some situa-

tions could lead to an accident.

HOW TO AVOID THE HAZARD

Never modify this ATV through improper

installation or use of accessories. All parts

and accessories added to this vehicle

should be genuine Yamaha or equivalent

components designed for use on this ATV

and should be installed and used accord-

ing to instructions. If you have questions,

consult an authorized Yamaha ATV dealer.

q

WARNING

8

Summary of Contents for BLASTER YFS200P





























































































































































Reviews:

No comments