Accessories
Checking the accessories
Make sure you have received all of the following accessories.
Power cord
The unit
Remote control
* A CR2025 Lithium
battery has already
been inserted into the
remote control.
Optical digital audio
cable
Mounting template
* Use when mounting the unit on awall.
Spacers (x 2/sheet)
* Use when mounting
the unit on a wall.
Owner’s Manual
(this booklet)
Using the remote control
Preparing the remote control
Remove the battery’s insulating strip before attempting to use the
remote control.
Battery’s insulating strip
En
14
Operating range of the remote control
Operate the remote control within the range shown in the following
figure.
Within 6 m (20 ft)
Remote control
sensor
NOTE
When the unit is mounted on a wall, point the remote control at the remote control
sensor on the top panel. For details, see the following:
▪ “Part names and functions of the front/top panel” (p.16)
▪ “Mounting the unit on a wall” (p.49)
Replacing the battery in the remote
control
Press and hold the release tab firmly in the direction indicated by
[A], and slowly slide the battery holder out in the direction indicated
by [B].
Battery holder
Release tab
CR2025 Lithium battery
En
15
