Part names and functions
Part names and functions of the front/top panel
The part names and functions of the front and top panels are as follows.
g
f
h
b
c
d
e
a
f
g
1
Indicators
The indicators on the top panel flash or glow,
to show the operation and setting status. In
this manual, indicators status, such as off,
glowing, and flashing, are shown as the
illustrations below.
Off
Glows
Flashes
NOTE
The brightness of the indicators can be changed using
DIMMER on the remote control. For details, see the
following:
▪ “Changing the brightness of the indicators
2
y
(input)
Select an input source to be played back
(p.25).
3
|
(mute)
Mute the audio output (p.25). Touch again
to unmute.
4
}
/
{
(/-)
5
z
(power)
Turn on or off the unit.
NOTE
The unit may automatically turn off when the auto
power standby function is enabled (p.36).
6
Speakers
7
Dual built-in subwoofers
The built-in subwoofers are located in the top
part of the unit.
En
16
8
Remote control sensors
Receive infrared signals from the remote
control of the unit (p.15).
NOTE
▪
2
,
3
,
4
and
5
are touch sensors. Touch icons
with your finger to control functions.
▪ Do not place any objects on the touch panel as
doing so may result in unintended operations.
▪ When touch panel control is disabled, no
operations can be performed using the unit’s touch
panel. This prevents accidental operation of the
unit. For details, refer to the following:
– “Enabling/disabling touch panel control (child
lock function)” (p.37)
En
17
