Audio-related and other issues
I can’t hear the audio from this product, or no sound is outputted.
(
Are you using the appropriate settings for the switch on the rear?
(
When the [
H
-MIX MINUS MIC] selector switch is set to [ON], you cannot hear the audio (your own
voice) from this product using headphones or earphones. In this case, set this to [OFF].
(
Set the [MIC GAIN] selector switch to [MID] or [HIGH].
(
Is your mic volume set to “0”?
(
You won’t be able to hear audio from this product if the mic volume knob is set to “0” (zero). Turn the
knob to raise the volume.
Feedback
(
Is the volume for the mic or headphones/earphones adjusted appropriately?
(
If you hear a low pulsating or a high-pitched screeching sound (feedback), lower the volume on your
mic, headphones or earphones.
Cannot adjust the volume
(
Are you adjusting the volume of the [AUX] input jack on the connected device?
(
You cannot adjust the [AUX] input jack volume by using the USB/smartphone input audio knob. Adjust
the volume from the connected device.
Windows PC is not recognized
(
Have you installed the driver?
(
You must install the Yamaha Steinberg USB Driver if you wish to connect this product to a Windows PC.
See the following website for how to install the Yamaha Steinberg USB Driver.
https://www.yamaha.com/2/ag01/
66
Troubleshooting > Audio-related and other issues
Summary of Contents for AG01
Page 1: ...LIVE STREAMING MICROPHONE EN User Guide ...
Page 4: ...Frequency response 72 Block and level diagrams 73 4 Contents ...
Page 70: ...Dimensions 116 118 281 Unit mm 70 Appendix Dimensions ...
Page 72: ...Frequency response 15 10 5 0 5 10 50 1k 5k 20k 100 500 Hz dB 72 Appendix Frequency response ...