k
[STREAMING OUT] selector switch
Selects which audio signal is sent to your iPhone/iPad/computer and to the device connected to the smartphone [
P
]
input/output jack.
WARNING
(
Adjust the volume before you change the setting of the selector switch on the rear side. This is because the levels may
suddenly get loud depending on the device you’ve connected, which could damage your hearing or cause external
devices to malfunction.
[MIC]
Sends only the audio that’s inputted into this product.
NOTE
We recommend that you turn the reverb on this product to the OFF setting when you record using DAW software or similar
apps, so that only the dry sound is recorded. This gives you more freedom to apply and mix with reverb or other effects in your
DAW software after you’ve recorded the track with the mic.
[INPUT MIX]
This setting is appropriate for broadcasting conversations and speech (voice chats). Sends the audio that’s inputted
to the [AUX] input jack of this product as a stereo mix.
NOTE
You can connect your smartphone or an instrument such as a keyboard to the [AUX] input jack, and send the audio mixed with
background music or sound effects.
[LOOPBACK]
This setting is appropriate for broadcasting conversations and video game streaming. The [INPUT MIX] audio and the
audio input from your iPhone/iPad/computer as well as from a smartphone connected to the smartphone input/
output jack is mixed and sent in stereo. This also mixes background music or game sounds that are input from your
iPhone/iPad/computer or smartphone.
NOTE
When using DAW software, set this to [MIC] or [INPUT MIX] to avoid feedback.
l
[
H
-MIX MINUS MIC] selector switch
When this is set to [OFF], you can hear the audio (your own voice) from this product using headphones. When this is
set to [ON], you cannot hear the audio (your own voice) from this product using headphones. Set this to [ON] if you
don’t want to hear your own voice when doing broadcast commentary or in other live streaming situations.
m
3/8″ screw hole for mic stand (with protective cap)
Used for attaching to a mic stand or desk-mounted microphone boom arm. Remove the protective cap before
attaching the mic. You will need a 3/8″ conversion adapter for attachment.
NOTICE
(
Make sure not to lose the protective cap and store it in a safe place.
NOTE
3/8″ conversion adapter (recommended product):
König & Meyer 19695 Universal joint - 3/8" male thread
12
Component names and functions > Rear panel
Summary of Contents for AG01
Page 1: ...LIVE STREAMING MICROPHONE EN User Guide ...
Page 4: ...Frequency response 72 Block and level diagrams 73 4 Contents ...
Page 70: ...Dimensions 116 118 281 Unit mm 70 Appendix Dimensions ...
Page 72: ...Frequency response 15 10 5 0 5 10 50 1k 5k 20k 100 500 Hz dB 72 Appendix Frequency response ...
