Edit
MONTAGE Reference Manual
123
Reference
RevSend (Reverb Send)
VarSend (Variation Send)
Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the
Reverb/Variation effect. This is active only when the Part Output/Drum Key Output is set to “MainL&R.”
Settings:
0 – 127
Part Output (Part Output Select)
Determines the specific output for the audio signal.
Settings:
MainL&R, AsgnL&R, USB1&2…USB29&30, AsgnL, AsgnR, USB1 – 30, Off, Drum
MainL&R:
Outputs in stereo (two channels) to the OUTPUT [L/MONO]/[R] jacks.
AsgnL&R:
Outputs in stereo (two channels) to the ASSIGNABLE OUTPUT [L]/[R] jacks.
USB1&2
…
USB29&30:
Outputs in stereo (Channels 1&2 – 29&30) to the [USB TO HOST] terminal.
AsgnL:
Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [L] jack.
AsgnR:
Outputs in mono (one channel) to the ASSIGNABLE OUTPUT [R] jack.
USB1 – 30:
Outputs in mono (Channels 1 – 30) to the [USB TO HOST] terminal.
Off:
No audio signal for the Part is output.
Drum:
“Drum Key Out” is displayed to determine the specific output for each Drum Key.
Envelope Follower
Calls up the Envelope Follower Setting display.
Refer to the Routing display (
) for Normal Parts (AWM2).
InsRev (Insertion Reverb Send)
InsVar (Insertion Variation Send)
Determines the Send level for the entire Drum Part (all keys), sent from Insertion Effect A/B to the Reverb/
Variation effect.
This is active only when the Drum Key Connection Switch is set to “InsA” or “InsB” and the Part Output/
Drum Key Output is set to “MainL&R.”
Settings:
0 – 127
