Yamaha 640 Owner'S Manual Download

Page: 49 / 188

Selecting a Multi Pad Bank

Press the [FUNCTION] button.

Press the [NEXT] button to display the Multi Pad BANK
screen.

Select “Multi Pad.”

Use the data dial, the [+/YES] button or the [-/NO] button.

Select a Bank.

Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons
[1]-[0].

Turning Chord Match On/Off

Use the same operation as in “Selecting a Multi Pad
Bank” above.

Press the [NEXT] button again.

• The chord match function

has no effect with pads that
contain percussion phrases.

• The chord match on/off

setting is restored to its
original status whenever a
preset Multi Pad Bank is
selected.

• When the chord match on/off

status of a user Multi Pad
Bank (see above) is
changed, the new status is
recorded with the Multi Pad
data.

Select the desired PAD.

Use the [NEXT]/[BACK] button.

Turn the CHORD MATCH function on or off.

Use the data dial, the [+/YES] button or the [-/NO] button.

The Multi Pads

BACK

NEXT

BACK

NEXT

BACK

NEXT

Summary of Contents for 640





























































































































































































Search results

Summary of Contents for 640

Reviews:

Related manuals for 640

Brands by name

Popular brands

Yamaha 640, Owner'S Manual

Search results

Summary of Contents for 640

Reviews:

Related manuals for 640

Brands by name

Popular brands