Yamaha 640 Owner'S Manual Download Page 103

Page: 103 / 188

103

101

Edit the setup data.

Press the [NEXT] and [BACK] buttons to switch among the displays (as
shown below).

Press the [NEXT] button to display the setup data saving
screen.

Save the changed data to the floppy disk.

Press the [RECORD] button to exit from the Record mode.

CAUTION

• While the file is being

saved, never eject the
floppy disk or turn the
power off.

Song Recording

The Save operation
is completed...

• To cancel the save operation (if

you wish to redo any edits), press
the [-/NO] button and continue
editing starting with step #11
above, after the display returns to
the SETUP DATA screen.

• To save the data to disk, press the

[+/YES] button.

• Select a track by pressing one of the

[TRACK1]-[TRACK16] buttons.

• Use the data dial, the [+/YES] button,

or the [-/NO] button to change the
desired values in each display.

[NEXT] button

[BACK] button

• Voice

• Volume

• Octave

• Pan

• DSP depth

• Chorus depth

• Reverb depth

[NEXT] button

[BACK] button

[NEXT] button

[BACK] button

[NEXT] button

[BACK] button

[NEXT] button

[BACK] button

[NEXT] button

[BACK] button

Summary of Contents for 640





























































































































































































Search results

Summary of Contents for 640

Reviews:

Brands by name

Popular brands

Yamaha 640, Owner'S Manual

Search results

Summary of Contents for 640

Reviews:

Brands by name

Popular brands