6-7
DATA_Disk:KAYO_DATA:AK9005_YFM400FW-67:YFM400-6.fm
EL
NOTE:
●
If the engine fails to start, release the start
switch, then push the start switch again.
Pause a few seconds before the next at-
tempt. Each cranking should be as short
as possible to preserve battery energy. Do
not crank the engine more than 10 sec-
onds on each attempt.
●
If the battery is discharged, pull the recoil
starter to start the engine.
7. If the engine is started with the starter
(choke) in position
1
, the starter (choke)
should be returned to position
2
to warm
up the engine. If the engine is started with
the starter (choke) in position
2
, keep the
starter (choke) in this position to warm up
the engine.
8. Continue warming up the engine until it
idles smoothly and return the starter
(choke) to position
3
before riding.
CAUTION:
See the “Engine break-in” section prior to op-
erating engine for the first time.
Summary of Contents for 4SH-28199-67
