Yamaha 212SS 2016 Owner'S/Operator'S Manual Download Page 136

Page: 136 / 160

Maintenance

130

Checking the steering cables

To check the steering cables:
(1) Check for smooth operation of the steer-

ing wheel and jet thrust nozzles.

(2) Check for proper steering adjustment.

The nozzles should both point straight
back when the steering wheel is cen-
tered.

If steering is stiff or misadjusted, ask a
Yamaha Boat Dealer to service it.

Checking the remote control levers

WARNING

Do not touch the shift gates while the re-
mote control levers are being operated,
otherwise you could be pinched.

Check the remote control levers for smooth
operation.
(1) Remove the engine shut-off cord (lan-

yard) and main switch keys.

(2) Operate the remote control levers several

times to make sure that operation is
smooth throughout the whole range.

Neutral position

TDE position

Forward position

Reverse position

Shift

Fully closed

Throttle

Fully open

If the remote control levers do not operate
smoothly, ask your authorized Yamaha Boat
Dealer for service.

SportsBoat_F2J15.book Page 130 Monday, May 18, 2015 6:25 PM

Summary of Contents for 212SS 2016

































































































































































Search results

Summary of Contents for 212SS 2016

Reviews:

Related manuals for 212SS 2016

Brands by name

Popular brands

Yamaha 212SS 2016, Owner'S/Operator'S Manual

Search results

Summary of Contents for 212SS 2016

Reviews:

Related manuals for 212SS 2016

Brands by name

Popular brands