Instrument operation
43
(3) Push the M button and T button simulta-
neously to save the setting and return to
the “1-Water Depth” display. Then, wait
approximately 8 seconds until the LCD
returns to the system menu.
6-Instr. Diag
Yamaha Boat Dealer use these functions to
test the meters and check the conditions of
the meters. These functions should not be
used by the owner.
The following 5 tests and checks can be car-
ried out.
1-Gauge Test
2-LCD Test
3-Analog Inputs
4-Binary Inputs
5-Binary Outputs
7- Set Clock
The time displayed by the clock can be set.
To set the clock:
(1) Push the M button and T button simulta-
neously to select the hour setting.
(2) Push the M button to decrease the hours
or push the T button to increase the
hours.
(3) Push the M button and T button simulta-
neously to save the hour setting and se-
lect the minute setting.
(4) Push the M button to decrease the min-
utes or push the T button to increase the
minutes.
(5) Push the M button and T button simulta-
neously to save the minute setting and
select the “AM” or “PM” setting.
Save
Water Depth Alarm
3 ft
SELECT
12
:00 AM
SELECT
12:
00
AM
SportsBoat_F2J15.book Page 43 Monday, May 18, 2015 6:25 PM
