Pre-operation checks
100
1
Engine shut-off switch
2
Clip
Cooling water pilot outlet check
Check that water comes out from the pilot out-
lets while the engines are running in the wa-
ter. If water is not circulating, something may
be clogging the intake grates. Refer to “Jet
pump clean-out procedure” on page 140.
TIP:
It may take up to 20 seconds for water to
reach the pilot outlets when first launching the
boat. The amount and force of the exiting wa-
ter will vary with engine speed.
NOTICE
A continuous flow of water from the pilot
outlets shows that water is flowing
through the engine cooling water passag-
es. If water is not flowing out of the pilot
outlets during operation, do not continue
to run the engines. Overheating and seri-
ous damage could occur. See “Engine
overheat warning system” on page 46 for
more information.
Fuel level check
Select the fuel level display of one of the multi-
function tachometer. (See page 38 for infor-
mation on selecting the fuel level display.)
1
Fuel level
Add fuel if necessary. (See page 83 for infor-
mation on filling the fuel tank.)
1
2
E
F
1
SportsBoat_F2J15.book Page 100 Monday, May 18, 2015 6:25 PM
