Yamaha 2011 WR250FA, Owner'S Service Manual

Page: 273 / 316

6-46
STEERING
7. Install:
• Front fork "1"
• Upper bracket "2"
• Main switch "3"
• Front brake hose guide bracket "4"
• Front reflector (For CDN) "5"
• Nut (front reflector) (For CDN) "6"
• Front reflector bracket (For CDN) "7"
• Temporarily tighten the pinch bolts (lower
bracket).
• Do not tighten the pinch bolts (upper bracket)
yet.
8. Install:
• Guide (speed sensor lead) "1"
After installing the guide as shown, pass the
speed sensor lead through the guide.
9. Install:
• Washer "1"
• Steering stem nut "2"
10.After tightening the nut, check the steering
for smooth movement. If not, adjust the
steering by loosening the steering ring nut
little by little.
11.Adjust:
• Front fork top end "a"
12.Tighten:
• Pinch bolt (upper bracket) "1"
• Pinch bolt (lower bracket) "2"
Tighten the lower bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
Nut (front reflector) (For CDN):
4 Nm (0.4 m•kg, 2.9 ft•lb)
Steering stem nut:
145 Nm (14.5 m•kg, 105 ft•lb)
Front fork top end (standard) "a":
5 mm (0.20 in)
Pinch bolt (upper bracket):
21 Nm (2.1 m•kg, 15 ft•lb)
Pinch bolt (lower bracket):
21 Nm (2.1 m•kg, 15 ft•lb)