Yamaha 2008 V-Star 1300 Owner'S Manual Download Page 31

Page: 31 / 90

INSTRUMENT AND CONTROL FUNCTIONS

3-15

EAU14320

Helmet holder

The helmet holder is located under the
rider seat.

To secure a helmet to the helmet
holder

1. Remove the rider seat. (See page

3-14.)

2. Attach the helmet to the helmet

holder, and then securely install
the seat.

WARNING

EWA10160

Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.

To release the helmet from the hel-
met holder

Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.

EAU42540

Adjusting the shock absorber
assembly

This shock absorber assembly is
equipped with a spring preload adjust-
ing ring, allowing the spring preload to
be adjusted to suit the rider’s prefer-
ence.
It is recommended to have a Yamaha
dealer adjust the spring preload.

CAUTION:

ECA10100

Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.

1. Helmet holder

1. Shock absorber assembly

2. Position indicator
3. Spring preload adjusting ring

U12C21E0.book Page 15 Thursday, October 11, 2007 3:35 PM

Summary of Contents for 2008 V-Star 1300



























































































Search results

Summary of Contents for 2008 V-Star 1300

Reviews:

Related manuals for 2008 V-Star 1300

Brands by name

Popular brands

Yamaha 2008 V-Star 1300, Owner'S Manual

Search results

Summary of Contents for 2008 V-Star 1300

Reviews:

Related manuals for 2008 V-Star 1300

Brands by name

Popular brands