Yamaha 2008 V-Star 1300 Owner'S Manual Download Page 59 | Manualshive

Page: 59 / 90

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-18

6

EAU22271

Adjusting the rear brake light
switch

The rear brake light switch, which is ac-
tivated by the brake pedal, is properly
adjusted when the brake light comes
on just before braking takes effect. If
necessary, adjust the brake light switch
as follows.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake light
switch in place. To make the brake light
come on earlier, turn the adjusting nut
in direction (a). To make the brake light
come on later, turn the adjusting nut in
direction (b).

EAU22390

Checking the front and rear
brake pads

The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.

EAU22430

Front brake pads

Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear

indicator grooves have almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.

EAU22500

Rear brake pads

Check each rear brake pad for damage
and measure the lining thickness. If a
brake pad is damaged or if the lining
thickness is less than 0.8 mm (0.03 in),
have a Yamaha dealer replace the
brake pads as a set.

1. Rear brake light switch

2. Rear brake light switch adjusting nut

1. Brake pad wear indicator groove

1. Lining thickness

U12C21E0.book Page 18 Thursday, October 11, 2007 3:35 PM

«
...
57
58
59
60
61
...
»

Summary of Contents for 2008 V-Star 1300



























































































Reviews:

No comments

Related manuals for 2008 V-Star 1300

Brand: CF MOTO Pages: 443

Brand: Cobra Pages: 38

Body Protector 4.5 Junior

Brand: Leatt Pages: 40

Brand: hepco & becker Pages: 4

990D0-44G00-ALM

Brand: Suzuki Pages: 24

Brand: LAZER Pages: 11

Brand: N-Com Pages: 2

Battery Relocation Kit

Brand: BoxerCafe Pages: 7

Brand: Zero Pages: 290

Brand: Thunderbike Pages: 7

Brand: Honda Pages: 4

Brand: Fekon Pages: 24

Brand: KTM Power Parts Pages: 22

Brand: KTM Power Parts Pages: 12

Brand: KTM Pages: 7

Brand: KTM Pages: 16

125 EXC EU 2014

Brand: KTM Pages: 27

2010 250 EXC-F AUS

Brand: KTM Pages: 125

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands