background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-15

6

Tire inspection

Always check the tires before operating
the motorcycle. If a tire tread shows
crosswise lines (minimum tread depth),
if the tire has a nail or glass fragments
in it, or if the sidewall is cracked, con-
tact a Yamaha dealer immediately and
have the tire replaced.

NOTE:

These limits may be different by regula-
tion from country to country. If so, con-
form to the limits specified by the
regulations of your own country.

WARNING

EWA10470

Have a Yamaha dealer replace
excessively worn tires. Besides
being illegal, operating the vehi-
cle with excessively worn tires
decreases riding stability and
can lead to loss of control.

The replacement of all wheel
and brake related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience.

Tire information

This motorcycle is equipped with cast
wheels and tubeless tires.

WARNING

EWA10460

The front and rear tires should
be of the same make and de-
sign, otherwise the handling
characteristics of the vehicle
cannot be guaranteed.

After extensive tests, only the
tires listed below have been ap-
proved for this model by
Yamaha Motor Co., Ltd.

1. Tire sidewall
2. Tire wear indicator

3. Tire tread depth

Minimum tire tread depth (front and 
rear):

1.0 mm (0.04 in)

Front tire:

Size:

130/90 16M/C 67H

Manufacturer/model:

DUNLOP/D404F X
BRIDGESTONE/EXEDRA G721

Rear tire:

Size:

170/70B 16M/C 75H

Manufacturer/model:

DUNLOP/K555
BRIDGESTONE/EXEDRA G722 G

U12C21E0.book  Page 15  Thursday, October 11, 2007  3:35 PM

Summary of Contents for 2008 V-Star 1300



























































































Reviews: