Yamaha 2008 V-Star 1300 Owner'S Manual Download Page 61 | Manualshive

Page: 61 / 90

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-20

6

EAU22730

Changing the brake fluid

Have a Yamaha dealer change the
brake fluid at the intervals specified in
the NOTE after the periodic mainte-
nance and lubrication chart. In addition,
have the oil seals of the master cylin-
ders and calipers as well as the brake
hoses replaced at the intervals listed
below or whenever they are damaged
or leaking.

●

Oil seals: Replace every two
years.

●

Brake hoses: Replace every four
years.

EAU23040

Drive belt slack

The drive belt slack should be checked
and adjusted at the intervals specified
in the periodic maintenance and lubri-
cation chart.

EAU38410

To check the drive belt slack

1. Place the vehicle on the sidestand.
2. Note the current position of the

drive belt using the marks near the
drive belt check hole.

NOTE:

The marks near the drive belt check
hole are 5.0 mm (0.2 in) apart.

3. Note the position of the drive belt

with a force of 45 N (4.5 kgf, 10 lbf)
applied to the belt with a belt ten-
sion gauge as shown.

NOTE:

A belt tension gauge is available at a
Yamaha dealer.

4. Calculate the drive belt slack by

subtracting the measurement not-
ed in step 2 from the measurement
noted in step 3.

5. If the drive belt slack is incorrect,

have a Yamaha dealer adjust it.

1. Drive belt
2. Marks

3. Drive belt slack

1. Belt tension gauge

Drive belt slack:

5.0–7.0 mm (0.20–0.28 in)

U12C21E0.book Page 20 Thursday, October 11, 2007 3:35 PM

«
...
59
60
61
62
63
...
»

Summary of Contents for 2008 V-Star 1300



























































































Reviews:

No comments

Related manuals for 2008 V-Star 1300

STEADYSTAND Cross Basic

Brand: ACEBIKES Pages: 6

Brand: AMERICAN IRONHORSE Pages: 104

Brand: Honda Pages: 102

Brand: hepco & becker Pages: 7

Brand: SHERCO Pages: 102

Operation and Instruction Manua

Brand: Takegawa Pages: 9

Brand: ESAB Pages: 4

Brand: Bajaj Pages: 319

Brand: Serpento Pages: 66

Brand: Yamaha Pages: 34

Brand: Yamaha Pages: 34

Brand: Yamaha Pages: 53

Brand: Yamaha Pages: 90

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 102

Brand: Yamaha Pages: 112

Brand: Yamaha Pages: 122

Brand: Yamaha Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands