3 - 19
CHK
ADJ
CHECKING THE COOLANT LEVEL/
CHANGING THE COOLANT
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check:
• coolant level
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
6. Close the hood.
CHANGING THE COOLANT
1. Remove:
• driver seat
• passenger seat
• console
Refer to “SEATS, ENCLOSURE, HOOD
AND CARGO BED” in chapter 8.
2. Lift the hood up.
3. Remove:
• coolant reservoir cap
1
4. Disconnect:
• coolant reservoir hose
2
5. Drain:
• coolant
(from the coolant reservoir)
6. Connect:
• coolant reservoir hose
7. Remove:
• coolant drain bolt (water pump)
1
(along with the copper washer)
www.midwestmanuals.com
