4 - 75
ENG
CRANKSHAFT AND OIL PUMP
REMOVING THE CRANKSHAFT
1. Remove:
• crankshaft
Use a crankcase separating tool
1
.
Crankcase separating tool
P/N. YU-01135-A, 90890-01135
CHECKING THE OIL PUMP
1. Check:
• rotor housing
• rotor cover
Cracks/wear/damage
→
Replace.
2. Measure:
• tip clearance
a
(between the inner rotor
1
and the outer
rotor
2
)
• side clearance
b
(between the outer rotor
2
and the pump
housing
3
)
• body clearance
c
(between the outer rotor
2
and the pump
housing
3
)
Out of specification
→
Replace the oil
pump.
3. Check:
• oil pump operation
Unsmooth
→
Repeat steps #1 and #2 or
replace the defective parts.
Tip clearance
less than 0.15 mm (0.0059 in)
<Limit>: 0.23 mm (0.0091 in)
Side clearance
0.03 ~ 0.10 mm
(0.0012 ~ 0.0039 in)
<Limit>: 0.17 mm (0.0067 in)
Body clearance
0.09 ~ 0.17 mm
(0.0035 ~ 0.0067 in)
<Limit>: 0.24 mm (0.0094 in)
www.midwestmanuals.com
