Yamaha 2004 Rhino 660 YXR660FAS Owner'S Manual Download

Page: 105 / 154

8-18

CAUTION:

Mix coolant with distilled water only. How-
ever, if distilled water is not available, soft
water may be used for refilling.

Changing the coolant

The coolant must be changed by a Yamaha
dealer at the intervals specified in the periodic
maintenance and lubrication chart.

NOTE:

●

Adding water instead of coolant lowers
the antifreeze content of the coolant. If
water is used instead of coolant, have a
Yamaha dealer check the antifreeze con-
tent of the coolant as soon as possible.

●

The radiator fan operation is completely
automatic. It is switched on or off accord-
ing to the coolant temperature in the radi-
ator.

If your vehicle overheats, see page 8-51 for
details.

U5UG10.book Page 18 Friday, August 1, 2003 7:40 PM

Summary of Contents for 2004 Rhino 660 YXR660FAS



























































































































































Search results

Summary of Contents for 2004 Rhino 660 YXR660FAS

Reviews:

Related manuals for 2004 Rhino 660 YXR660FAS

Brands by name

Popular brands

Yamaha 2004 Rhino 660 YXR660FAS, Owner'S Manual

Search results

Summary of Contents for 2004 Rhino 660 YXR660FAS

Reviews:

Related manuals for 2004 Rhino 660 YXR660FAS

Brands by name

Popular brands