Yamaha 2004 Rhino 660 YXR660FAS Owner'S Manual Download

Page: 65 / 154

6-6

Shifting: Neutral to Reverse

NOTE:

The drive select lever cannot be shifted into or
from reverse without applying the brake ped-
al.

1. Stop the vehicle. Keep your foot off the

accelerator pedal.

2. Apply the brake pedal.
3. Shift from neutral to reverse or vice versa

by moving the drive select lever along the
shift guide.

1. Drive select lever

NOTE:

●

When in reverse, the reverse indicator
light should be on. If the light does not
come on, ask a Yamaha dealer to inspect
the reverse indicator light electrical cir-
cuit.

●

Due to the synchronizing mechanism in
the engine, the light may not come on un-
til the vehicle starts moving.

4. Check behind for people or obstacles,

then release the brake pedal.

U5UG10.book Page 6 Friday, August 1, 2003 7:40 PM

Summary of Contents for 2004 Rhino 660 YXR660FAS



























































































































































Search results

Summary of Contents for 2004 Rhino 660 YXR660FAS

Reviews:

Related manuals for 2004 Rhino 660 YXR660FAS

Brands by name

Popular brands

Yamaha 2004 Rhino 660 YXR660FAS, Owner'S Manual

Search results

Summary of Contents for 2004 Rhino 660 YXR660FAS

Reviews:

Related manuals for 2004 Rhino 660 YXR660FAS

Brands by name

Popular brands