manualshive.com logo in svg

Yamaha 2004 Rhino 660 YXR660FAS, Owner'S Manual, Page: 70 / 154

Share
Download
Yamaha 2004 Rhino 660 YXR660FAS Owner'S Manual Download Page 70

6-11

EBU02210

Accessories and loading 

EBU02220 

Accessories 

Accessories can affect the handling and con-
trol of your vehicle. Keep the following in mind
when considering an accessory or operating a
vehicle which has accessories. 

●

Choose only accessories designed for your
vehicle. Your Yamaha dealer has a variety
of genuine Yamaha accessories. Other ac-
cessories may also be available on the
market. However, it is not possible for
Yamaha to test all non-Yamaha accesso-
ries, nor have any control over the quality or
suitability of them. Choose a genuine
Yamaha accessory, or one that is equiva-
lent in design and quality.

●

Accessories should be rigidly and securely
mounted. An accessory which can shift po-
sition or come off while you are operating
could affect your ability to control the vehi-
cle. 

●

Do not mount an accessory where it could
interfere with your ability to control the vehi-
cle. Examples include (but are not limited
to) an object that limits your ability to turn
the steering wheel or one that limits your
view. 

●

Use extra caution when driving a vehicle
with accessories. The vehicle may handle
differently than it does without accessories.

U5UG10.book  Page 11  Friday, August 1, 2003  7:40 PM

Summary of Contents for 2004 Rhino 660 YXR660FAS



























































































































































Reviews:

No comments