background image

1/2 

 

 

- Preface 

Thank you for purchasing a Yamada Pump. This machine is a portable type oil lubricator to supply lubricant to 
machines and vehicles. The machine is provided with a 110 type air-powered pump on a large cabinet with a capacity 
of 50L, which is most suitable to supply a large volume of oil at a time. 
The machine is also provided with a grip meter with flow meter in the standard specification, which permits grasp the 
oil supply volume accurately. 

 
<Note>

 

This machine, which is designed exclusively for oil, cannot be used for any substance other than lubricant. 

 

-  For Safe Operation 

This manual describes the items that are important for the user to operate this product safely, correctly, and efficiently. 
Before operating this product, read this manual thoroughly, in particular, “Warnings and Cautions” at the beginning of 
this manual. 
 

-  Warnings and Cautions 

For safe use of this product, be sure to note the following: In this document, warnings and cautions are indicated by 
symbols. These symbols are for those who will operate this product and for those who will be nearby, for safe 
operation and for prevention of personal injury and property damage. The following warning and caution symbols 
have the meanings described below. Be sure to remember their meanings. 
 

WARNING 

This indicates the existence of potential hazard which, if not avoided, will 

result in death or serious injury. 

CAUTION : 

This indicates the existence of potential hazard which, if not avoided, may 

result in bodily injury or in physical damage. 

Furthermore, to indicate the type of danger and damage, the following symbols are also used along with those 
mentioned above: 

   

This symbol indicates a DON'T, and will be accompanied by an explanation on something you must not 
do.  

 

This symbol indicates a DO, and will be accompanied by instructions on something you must do in a 
certain situation. 

 

-  Precautions on Use 

The following warnings and cautions are very important. Be sure to observe them. 

WARNING 

-  Some types of oil that you may use may inflame the skin. Read the precautions for handling the oil 

given by the oil maker and handle the oil carefully. 

-  This machine cannot be used for gasoline, light oil, chemicals, solvents, etc. Gasoline is a high-volatility 

fuel. Do not use it to wash the pump in any case. It may cause ignition or explosion. 

-  When operating the machine, electrostatic sparks may give a shock to the human body or cause death 

or bodily injury due to a fire or explosion. Be sure to perform grounding securely by using a grounding 
conductor according to the operating environment. 

 

 

 

 

 

Summary of Contents for SGR-110A5

















Reviews: