background image

 

1

 

1. Names of Parts 

1.1 Names of Parts 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1.2 Contents of Package 

The main equipment and accessories are packed in different cases. Open the top part of the corrugated fiberboard 
case and check if the pump assembly and oil tank are not damaged and if accessories are all contained in the 
package. 

 
 

2. Principles of Operation 

The Yamada Air-powered Pump is a reciprocating type that is 
driven by compressed air. The pump consists of an air motor to 
drive the pump and a lower pump to draw up the material as shown 
in the figure at right. 
When compressed air is supplied from the compressor to the air 
motor, the air piston starts its up/down motion by the function of the 
air switching mechanism built in it. 
This motion is transmitted to the piston of the lower pump by the 
connecting rod that connects between the air piston of the air motor 
and the piston of the lower pump, thereby giving the up/down 
motion to it. 
When the up/down reciprocating motion of the piston of the lower 
pump is performed, the material is sucked into the lower pump and 
fed out from the discharge port by pressure. 

 
 
 
 

 Lower pump 

 Connecting
 rod 

 Air Motor 

Summary of Contents for SGR-110A5

















Reviews: