7
Adding Accessories (if you purchased extra accessories)
All accessories in the kit are linked to the Smart Hub. If you purchased extra accessories (or for some reason the
accessories are deleted), please do the following:
Learn/ Test
button
Press & hold
for 3 seconds
Learn/Test button
One single press.
For the following accessories, please hold the Learn button for 10 seconds before releasing to enter Learn mode.
Learn/Test button
One single press.
Learn/Test button
One single press.
Hold for 10 seconds
Hold for 10 seconds
Hold for 10 seconds
Learn/Test button
One single press.
Learn/Test button
One single press.
Learn/Test button
Press 8 and 9
together
Learn/Test button
Learn/Test button
Learn/Test button
LED
One by one, press the learn button on the accessory according to below. The Smart
Hub will beep (single or multiple dependent on device) when a new device is registered,
and after a couple of seconds you will see it in your Device List on your App.
Exit Learn Mode:
1. Press and hold the Smart Hub 2.0. Learn button for at least 6 seconds.
After the 6 seconds you will hear a slightly longer beep.
2. Your Smart Hub is now out of Learn mode.
1
3
2
If the accessory doesn’t learn. Remove the batteries for 5 seconds then replace and
try relearning within 3 minutes.
1.
P
ress and hold the learn button on
your Smart Hub. you will hear a
beep, after 6 seconds you will hear
a slightly longer beep.
2.
Your Smart Hub is now in learn mode.
EF-PETPIR
SR-PC
SR-PVC
SR-PS
Panel MAC / Serial Number: