manualshive.com logo in svg

Yale YL-SR-320, Manual, Page: 1 / 20

Share
Download
Yale YL-SR-320 Manual Download Page 1

Smart Home 

Alarm Kits

Installation · Programming · Operating

Keep this manual safe for reference and future maintenance

Contents

Thank you for choosing the Yale Smart Home Alarm 

System. This simple to install system has been designed 

with the user in mind.

All the components are self contained and no wired 

connections are needed between the units. There is no 

need to damage the home decor, lift carpets or run cables.

You can install up to 20 devices (Max. 6 PIR Image / Video 

Cameras) in this system. As well as extra Door/Window 

Contacts, PIR Motion Detectors and Smoke Detectors, 

you can add Key Fob remote controls for added control 

convenience.

Regular testing and battery changes (when notified by the 

system) will ensure reliability and peace of mind.

There is no need to wire into the mains supply or seek 

the services of a qualified electrician. The Smart Hub is 

powered by an adaptor and all other components are 

powered by battery (all batteries included).

All accessories are ‘tamper’ protected. Any unauthorised 

tampering with these items when the system is armed will 

result in the alarm being triggered.

1. Location planning  

2

2. Un-pack all the parts  

4

3. Initial set-up  

5

3. Additional accessories  

6

4. Mounting devices  

8

5. Using the system  

10

6. About your Alarm System  

12

7. Using accessories  

13

8. Changing the batteries  

15

9. Troubleshooting  

17

10. Specifications  

 

19

Recommended Installation Sequence

We recommend you follow the simple install

sequence, headings numbered 1-5.

Information and illustrations are subject to change within this 

document. Yale reserves the right to alter the specification and 

product design at anytime without notice. Yale® is a registered 

trademark. © 2016 ASSA ABLOY. All rights reserved.

smart

Living

Issue No: 1A

The 2 year guarantee for this Yale Smart 

Home Alarm Kit is active from the date 

of purchase (A copy of this guarantee is 

available on our website).

Please register online within 

12 months of purchase at 

www.yale.co.uk/registeryourproduct

2

For more information on this product and Yale Smart 

Living Range visit 

www.yale.co.uk/smart-living

Consumer Support: [email protected]

Summary of Contents for YL-SR-320





















Reviews:

No comments