manualshive.com logo in svg

Yale Lift-Tech SHAW-BOX, Operation, Service & Parts Manual

The Yale SHAW-BOX, an exceptional industrial equipment, provides reliable lifting solutions. Ensure optimal performance and seamless maintenance by accessing the comprehensive Operation & Service Manual. Download this free manual from manualshive.com to effortlessly troubleshoot, fine-tune, and ensure the smooth operation of your Yale SHAW-BOX for years to come.

Share
Download
background image

Page 3

No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher.

NOTICE: Information contained in this book is subject to change without notice.

INDEX

SECTION I

GENERAL DESCRIPTION

Page

Paragraph 1-1 General ................................................................................................................................................ 4
Paragraph 1-2 Basic Construction .............................................................................................................................. 4

SECTION II INSTALLATION

Paragraph 2-1 General ................................................................................................................................................ 4
Paragraph 2-2 Suspending Hoist ................................................................................................................................ 4
Paragraph 2-3 Connecting Hoist to Electrical Service ............................................................................................... 5
Paragraph 2-4 Pre-Operation Checks ......................................................................................................................... 5

SECTION III OPERATION

Paragraph 3-1 General ................................................................................................................................................ 7
Paragraph 3-2 Push Button Operation ........................................................................................................................ 7
Paragraph 3-3 Overload Clutch Operation ................................................................................................................. 7
Paragraph 3-4 Operating Precautions ........................................................................................................................ 7

SECTION IV LUBRICATION

Paragraph 4-1 General ................................................................................................................................................ 8
Paragraph 4-2 Change Gearcase Oil .......................................................................................................................... 8
Paragraph 4-3 Lubricate Hoist Cable .......................................................................................................................... 8
Paragraph 4-4 Lubricate Upper Sheave & Lower Block Assembly ............................................................................ 8
Paragraph 4-5 Limit Stop Lever Lubrication ............................................................................................................... 8
Paragraph 4-6 Lubricate Limit Switch ......................................................................................................................... 8

SECTION V INSPECTION AND PREVENTATIVE MAINTENANCE

Paragraph 5-1 General ................................................................................................................................................ 9
Paragraph 5-2 Inspect Lower Block .......................................................................................................................... 10
Paragraph 5-3 Inspect Upper Block and Hoist Suspension ..................................................................................... 10
Paragraph 5-4 Inspect Electrical Controls ................................................................................................................ 12
Paragraph 5-5 Inspect Motor Brake and Actuating Mechanism ............................................................................... 12
Paragraph 5-6 Inspect Mechanical Load Brake and Gearing .................................................................................. 12
Paragraph 5-7 Inspect Rope Drum and Shaft .......................................................................................................... 14
Paragraph 5-8 Rope Inspection, Replacement & Maintenance ............................................................................... 14
Paragraph 5-9 Rope Reeving .................................................................................................................................... 15
Paragraph 5-10 Testing Hoist .................................................................................................................................... 20

SECTION VI TROUBLESHOOTING CHART ................................................................................................................ 20

SECTION VII ADJUSTMENTS

Paragraph 7-1 Mechanical Load Brake ..................................................................................................................... 22
Paragraph 7-2 Motor Brake Adjustment .................................................................................................................... 22
Paragraph 7-3 Block Operated Limit Switch ............................................................................................................. 22
Paragraph 7-4 Geared Rotary Limit Switch Adjustment .......................................................................................... 23
Paragraph 7-5 Overload Clutch Adjustment and Testing ......................................................................................... 23
Paragraph 7-6 Shortening of Push Button Cable ..................................................................................................... 25

SECTION VIII WIRING DIAGRAMS .............................................................................................................................. 25

SECTION IX PARTS LIST

Paragraph 9-1 General .............................................................................................................................................. 25
Paragraph 9-2 List of Parts Illustrations .................................................................................................................... 25

FOREWORD (Continued)

The contents of this manual are of necessity, general in nature
and may cover features not incorporated on your hoist; or, you
may have ordered features not covered by this manual.
Therefore, the user must exercise care in applying instructions
given in this manual. If specific information not in this manual
is required, contact the factory at Muskegon, Michigan 49443.

THE INFORMATION CONTAINED IN THIS MANUAL IS FOR
INFORMATIONAL PURPOSES ONLY AND LIFTTECH

INTERNATIONAL DOES NOT WARRANT OR OTHERWISE
GUARANTEE (IMPLIEDLY OR EXPRESSLY) ANYTHING
OTHER THAN THE  COMPONENTS THAT  LIFT-TECH
MANUFACTURES AND ASSUMES NO LEGAL
RESPONSIBILITY (INCLUDING, BUT NOT LIMITED TO
CONSEQUENTIAL DAMAGES) FOR INFORMATION
CONTAINED IN THIS MANUAL.

Summary of Contents for SHAW-BOX





































































Reviews:

No comments

Related manuals for SHAW-BOX

National Instruments C Series Calibration Procedure preview
C Series
Brand: National Instruments Pages: 8
Racal Instruments 1266 Manual preview
1266
Brand: Racal Instruments Pages: 64
Magnum MIG 208 Alu Synergy Operating Manual preview
MIG 208 Alu Synergy
Brand: Magnum Pages: 24
WAGNER 2K COMFORT Original Operating Manual preview
2K COMFORT
Brand: WAGNER Pages: 128
ShoreStation SSV40120EDC Service Manual preview
SSV40120EDC
Brand: ShoreStation Pages: 15
National Instruments PCIe-7846 User Manual preview
PCIe-7846
Brand: National Instruments Pages: 9
Miller Blue Thunder Series Owner'S Manual preview
Blue Thunder Series
Brand: Miller Pages: 36
Pentair SPACOMMAND CP3800 Series Installation And User Manual preview
SPACOMMAND CP3800 Series
Brand: Pentair Pages: 36
Madas MTC10 Manual preview
MTC10
Brand: Madas Pages: 58
PACH & COMPANY AeGIS 9100CR200 Installation And Programming Manual preview
AeGIS 9100CR200
Brand: PACH & COMPANY Pages: 49
Salda RIS 700HE/HW EKO 3.0 Technical Manual preview
RIS 700HE/HW EKO 3.0
Brand: Salda Pages: 40
Tractel Davitrac Installation, Operating And Maintenance Manual preview
Davitrac
Brand: Tractel Pages: 162
WAGO 750-560 Manual preview
750-560
Brand: WAGO Pages: 30
HEIDENHAIN POSITIP 880 Installation Instructions Manual preview
POSITIP 880
Brand: HEIDENHAIN Pages: 64
Ruida Technology LFS-PM Series Operating Manual preview
LFS-PM Series
Brand: Ruida Technology Pages: 35
QUALITY LIFTS Q4P09H Installation, Operation & Maintenance Manual preview
Q4P09H
Brand: QUALITY LIFTS Pages: 23
ESAB Origo Mag C171 Service Manual preview
Origo Mag C171
Brand: ESAB Pages: 45
SPINOGY Xcool Operating Manual preview
Xcool
Brand: SPINOGY Pages: 27

Brands by name

Popular brands

Load more brands