Tip the tent on its end so that you have access to the predrilled holes.
Unfasten the velcro straps, and allow the tent to unfold as pictured.
Unzip the windows to access the holes from under the mattress.
2
1
Attach the Mounts to Bottom of the SkyRise.
3
fig. 4
fig. 5
Orient mounts horizontally for a side opening:
Orient mounts vertically for a rear opening:
4X
Note: Have a friend help hold tent steady.
Slide 2 square nuts
into each mount, and
align the mounts with
the predrilled holes in
the tent floor.
B
Reach in through the tent
opening and feed the bolts
through the holes into the
tent floor under the matress,
and into the square nuts.
Thread the bolts all the way
in with your hand.
C
Be sure knobs all face same
direction and locks are on
same side facing outboard
(see figure 4 and figure 5).
ASSEMBLE & INSTALL
holes
D
Now tighten
the bolts down
completely
with the
supplied hex
wrench.
Using the hex
wrench loosen
all 4 side bolts.
A
5.25 +/- .25 Nm
The ladder, ladder brackets,
ladder hardware, rainfly rods,
and cover are shipped in the
tent. Unzip the tent, remove
them, and set them aside.
locks
no locks
no locks
locks
