4
Flip SkyRise over to rest on clamps. Locate the predrilled holes
under the stickers near the edge. Lay the ladder mounting
brackets over the holes. Orient them as shown here.
5
2X
2.75 +/- .25 Nm
Thread a washer onto each of the long screws.
Reach in through the opening in the tent, and
insert the long screws up through the tent
floor, and through the ladder brackets.
4X
Using the included hex
wrench, and an open-
end or adjustable
wrench, tighten down
the brackets.
C
5.25 +/- .25 Nm
Thread a locknut
onto each screw.
B
A
2X
Align ladder brackets. Using two
wrenches secure the ladder with the
short bolt, washer and lock nut.
Be
sure bolts are fully tightened!
6