ROC 4
1032414B-1/15
Part #1032414 RevB
TOOLS RECOMMENDED:
• You may need either a 7/8"
OR a 15/16" Socket wrench
• 2 adjustable-end wrenches
• Flathead screwdriver
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL YAKIMA
RACKS AND ACCESSORIES BE
PROPERLY AND SECURELY
ATTACHED TO YOUR VEHICLE.
IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE
ACCIDENT, AND COULD CAUSE
SERIOUS BODILY INJURY OR
DEATH TO YOU OR TO OTHERS.
YOU ARE RESPONSIBLE FOR
SECURING THE RACKS AND
ACCESSORIES TO YOUR CAR,
CHECKING THE ATTACHMENTS
PRIOR TO USE, AND
PERIODICALLY INSPECTING THE
PRODUCTS FOR ADJUSTMENT,
WEAR, AND DAMAGE.
THEREFORE, YOU MUST READ
AND UNDERSTAND ALL OF THE
INSTRUCTIONS AND CAUTIONS
SUPPLIED WITH YOUR YAKIMA
PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU
DO NOT UNDERSTAND ALL OF
THE INSTRUCTIONS AND
CAUTIONS, OR IF YOU HAVE NO
MECHANICAL EXPERIENCE AND
ARE NOT THOROUGHLY FAMILIAR
WITH THE INSTALLATION
PROCEDURES, YOU SHOULD
HAVE THE PRODUCT INSTALLED
BY A PROFESSIONAL INSTALLER
SUCH AS A QUALIFIED GARAGE
OR AUTO BODY SHOP.
READ THESE
WARNINGS
• HITCH LOAD IS LIMITED TO FOUR
BIKES with the addition of one cradle.
• OFF-ROAD DRIVING is not
recommended and could result in
damage to your vehicle or your bikes.
This product is designed for a 2" hitch
receiver. Some undersized receivers may not
accept this product. A potential weak link is
the hitch receiver and the structure on
which it is mounted. Heavy bikes or off-road
driving could result in damage to the hitch
receiver. If you do not know the capabilities
of your hitch receiver, seek a professional to
assess your receiver and its mounting.
