rePlaCe CoVers
maintenanCe
•
Check roof rack is securely attached whenever you refit it to the vehicle. If the unit feels loose, refer
to the fitting instructions and readjust.
•
Regularly check all fasteners. This includes all attached accessories and roof racks.
•
If contaminated with oil, fuel or acid remove with hot soapy water.
Caution
•
Do not exceed the vehicle manufacturer’s roof load rating. Total load equals weight of roof racks +
acces cargo/equipment.
•
Ensure that all loads are distributed evenly across the roof racks and are secured.
•
A loaded roof rack system can alter the performance of your vehicle. Be especially aware of the
effects of side winds, changing of direction, and braking performance. Avoid rapid acceleration and
deceleration. Drive Carefully.
•
Make sure all loads are securely fastened with non-elastic straps. Check regularly during longer
journeys.
•
Never drive into a car wash with the roof rack system fitted.
Ensure the locks on the legs are in the locked
position (horizontal). Using new covers from
the replacement kit, slide cover into the
leg, you will hear a ‘click’ when the cover is
securely locked. Repeat for all legs.
Locked Unlocked
9
www.yakima.com
YaKima ProduCts, inC.
4101 KRUSE WAY, LAKE OSWEGO, OR
97035-2541 USA - 888.925.4621
yakima.com/support
YaKima euroPe CooPeratieF ua
Twentehaven 7, Nieuwegein 3433, The Netherlands
YaKima australia PtY. ltd
17 Hinkler Court, Brendale, QLD 4500 - Tel: 1800 143 548
Instruction #1035947A-4/4
