Instruction #1035947A-2/4
Separate the leg by pulling the leg
assembly away from the aluminium bar.
seParate leG From Bar
note
- read
steps 4 - 4b before
commencing.
remoVe Pin and toGGle
Insert a metal pick into cavity
on underside of the leg and use
pick to push the pin across.
Keep finger held on toggle.
Caution
- toggle is under
spring tension; as pin is
removed it will want to move.
With finger still held on
toggle, turn leg over. Pull
pin out from other side of
housing using long nose
pliers. Store pin aside for
use in step 6.
3
4
4
4
Place and HOLD finger
on toggle. With finger
held firmly on toggle
turn leg over
a
b
Gradually release pressure
off toggle until it comes
free. Discard toggle.
