Instruction #1035947A-3/4
Using a new toggle from the replacement kit, position new
toggle by locating the knob into the top of the spring inside
leg. Push toggle down into spring and hold firmly with finger.
insert neW toGGle
note
- new toggle can be identified
by scalloped feature as shown.
With toggle held down, insert pin through hole inside of spring housing. Keep
pushing in until the pin passes through the hole in the toggle and into the other
side of the leg. Once pin is fully inserted and secure, release finger off toggle.
re-insert Pin
Re-insert the leg by pushing the leg
assembly into the aluminium bar.
re-insert leG into Bar
Re-attach clamp to underside of leg, place nut into hexagonal recess on
clamp plate. Holding these two items in place, feed bolt through from top
side of leg. Use a 5mm hex wrench to fasten these items together.
re-attaCH leG Bolt and ClamP
5
7
6
8
