Instruction #1036058B - page 2 of 10
ASSEMBLY
To extend the arms, first pull the pin on the driver-side arm and swing it out until
it locks into place. Then, pull the pin on the passenger-side arm and swing it out
until it locks into place.
NOTE:
The EXO LitKit is not intended to remain installed
when the EXO SwingBase arms are folded back to their stowed positions.
CAUTION:
Keep your fingers away from ALL moving parts!
ATTACH THE LIGHT TUBES TO THE LIGHTS.
1
Pass the connector through the center hole of the left light tube as s
hown. Use the
provided 10 mm wrench to assemble the left and right side lights to the left and
right side light tubes as shown using 2 bolts, 2 washers, and 2 nuts for each side.
EXTEND THE EXO SWINGBASE™ ARMS.
2
