1033568B - 4/15
CLOSE THE LEVER.
It should close with FIRM RESISTANCE against the forks.
TEST YOUR
INSTALLATION! If forks
can move in the mount,
open the lever and
tighten the adjustment
knob more.
Your bike’s forks are
secure oNlY after
the lever closes with
SolID RESISTANCE.
•
SKS ® Lock Cores are optional.
•
To install SKS ® Lock Cores,
refer to lock instructions.
•
To purchase lock cores visit
www.yakima.com or your local
Yakima dealer.
Pull the strap
through wheel
spokes.
Insert the strap
end behind the
red button.
Check your wheel
and tighten the
strap if necessary.
SECURE THE REAR WHEEL.
Tighten strap by
lifting the red tab up.
Release the
strap by pushing
the button.
TEST THE STABILITY OF
THE INSTALLATION BY
TUGGING ON
FORK LEG.
If forks move out of the
skewer —
Open lever and tighten
the brass wheel slightly.
You may need to loosen
or tighten the brass
wheel so that lever
closes firmly with
resistance.
If the wheel is loose in the tray —
Pull down on the strap end.
Some bike wheels may
be too narrow to allow
a tight fit. Slide the strap
in the tray until it rests
against the rim.
If pod
can slide —
Remove the
skewer and pod
cover, and tighten
the screws.
Always replace the
pod cover.
LOCK THE COPPERHEAD.