![background image](http://html.mh-extra.com/html/yakima/8003062/8003062_instructions-manual_893623002.webp)
1032628B-2/9
Install SKS
®
Locks
(purchased separately).
PULL FIRMLY up
on the ends to be
sure the Lift
Ticket is
completely
closed.
If your bindings touch car roof,
install SkiLift (steps 9,10).
If not, check your installation
carefully and have fun!
Place ski mount onto SnapArounds.
Push a nut into the square hole
nearest the hinged end.
Slide a bolt into the
round hole.
Place a nut in the square hole
closest to the opening of the ski
mount.
Slide a bolt into the round hole.
Turn clockwise and engage the
nut.
Tighten firmly using the Allen
wrench .
Open ski mount.
Slide ski mount into place
on the crossbar. Tighten
using the Allen wrench
until the ski mount does not
rotate in the bar.
Turn clockwise and engage
the nut.
Slide ski mount to the outside of the tower
while you are installing the first bolt.