VR-500 O
PERATING
M
ANUAL
27
C
LEARING
OF
A
M
EMORY
B
ANK
This feature allows to mask (clear) the all memory channels in the desired memory bank at
the same time.
•
Set the radio to the VFO mode by pressing the
[CLR(P.SET)]
key.
‚
Press the
[ENT(SET)]
key while pressing the
[FUNC]
key to activate the “Set” (Menu)
mode.
ƒ
Rotate the
DIAL
knob to select Menu #26 [Clear Bank].
„
Rotate the
DIAL
knob one click clockwise while pressing the
[FUNC]
key to enable the setup of Memory Bank Clearing.
…
Key in the memory bank number (one digit) to be cleared
from the keypad.
†
The display will now indicate “
Clear ...
” for about four seconds. Thereafter, clearing
of the prescribed Memory Bank will be complete.
‡
Press the
[CLR(P.SET)]
key to exit to normal operation.
Important Note: A cleared Memory Bank can not be restored. All data for that bank will
have to be re-entered.
M
EMORY
C
HANNEL
C
HECK
This feature allows you to view the number of Vacant Memory Channels in the each Memory
Bank (or all Memories).
•
Set the radio to the VFO mode by pressing the
[CLR(P.SET)]
key.
‚
Press the
[ENT(SET)]
key while pressing the
[FUNC]
key to activate the “Set” (Menu)
mode.
ƒ
Rotate the
DIAL
knob to select Menu #29 [Vacant Memory].
„
Rotate the
DIAL
knob while pressing the
[FUNC]
key to re-
view the number of Vacant Memory Channels in the each
Memory Bank. The total number of available Memory Chan-
nels will also be displayed after the display of Bank #9's available space.
…
Press the
[CLR(P.SET)]
key to exit to normal operation.
Memory Mode
