VR-500 O
PERATING
M
ANUAL
40
Set Item 23 [Opening Bell]
Function:
Select the opening “Beep” sequence when the VR-500 is powered on.
Available Values: OFF/1/2/3
OFF: No beep
1:
“Pi” (Single Beep)
2:
“Po-Pi” (Two Beeps, Low
è
High pitch)
3:
“Pi-Pi” (Two Beeps, both High pitch)
Default:
1
Set Item 24 [Opening Msg]
Function:
Select the Opening Message when the VR-500 is powered on.
Available Values: OFF/User/Default
OFF:
No Opening Message
User:
Set by user via Set Item #25 (see below)
Default: “YAESU VR-500”
Default:
Default
Set Item 25 [Msg Edit]
Function:
Program the Opening Message.
Opening Message Programming:
•
After selecting Set Item 25, rotate the
DIAL
knob one click clock-
wise while pressing the
[FUNC]
key to enable programming of
the opening message. You will notice the first entry's place blink.
‚
Rotate the
DIAL
knob to select the character type (the selections
are
“
ABC
”
[alphabet] and
“
123
” [numeric]).
ƒ
Press the keyboard to enter the desired letter or number.
Example 1: If you select the “
ABC
” character type in the previous step,
press the
[2(MW/MC)]
key repeatedly to toggle among the
six characters:
A
è
B
è
C
è
a
è
b
è
c
è
A
•
•
•
Example 2: If you select the “
123
” character type in the previous step,
press the
[2(MW/MC)]
key to enter the digit “
2
”.
„
Rotate the
DIAL
knob clockwise while pressing the
[FUNC]
key
to move to the next character.
…
Repeat steps
‚
to
„
to program the remaining letters or numbers
of the desired message. A total of eight characters may be used in
the creation of a message.
†
When you have completed the creation of the message, press the
[ENT(SET)]
key momentarily to save the message.
Set Mode
