Yaesu FTM-500DR, Advance Manual

Page: 67 / 74

67
SD CARD
107 BACKUP
The transceiver settings information can be saved to a microSD memory card, also the
saved information can be loaded to the transceiver.
1. Press and hold the
FUNC knob

[ 107 BACKUP ]

Press the FUNC knob
2. Rotate the FUNC knob to select the operation to be performed.
WRITE TO SD Saves the transceiver setting information to a microSD memory
card.
READ FROM SD Loads the information to the transceiver from a microSD mem-
ory card.
3. Press the FUNC knob.
The copy direction selection screen will be displayed.
4. Rotate the FUNC knob to select the file to be copied, then press the FUNC knob.
The confirmation screen will be displayed.
ALL Copies all data.
MEMORY Copies only the memory channels and backtrack position infor-
mation.
SETUP Copies only the set-up Menu settings.
5. Rotate the FUNC knob to select [ OK ], then press the FUNC knob.
“Completed” will be displayed when the copying is completed.
108 MEMORY INFO
Display information from SD Memory Card.
1. Press and hold the
FUNC knob

[ 108 MEMORY INFO ]

Press the FUNC knob
The bar graph and the following information will be displayed:
Used space : xx,xxx MB
Free space : xx,xxx MB
Capacity : xx,xxx MB
109 FORMAT
Initialize a new micro-SD memory card.
Formatting a microSD memory card erases all data saved on it. Before formatting the card,
be sure to check for data and save it before formatting.
1. Press and hold the
FUNC
knob

[
109 FORMAT
]

Press the
FUNC
knob
The confirmation screen will be displayed.
2. To format the microSD card, turn the
FUNC
knob to select [
OK
] and then press the
FUNC
knob.
Refer to the Operating Manual for details.