Yaesu FTM-500DR, Advance Manual

Page: 49 / 74

49
RX
15 FM BANDWIDTH
The modulation can be set to half of its usual level.
Select “WIDE” for normal amateur radio operation.
1. Press and hold the
FUNC knob

[ 15 FM BANDWIDTH ]

Press the FUNC knob
2. Rotate the FUNC knob to select the desired setting.
WIDE Normal transmit modulation level.
NARROW Modulation is half of the normal level.
16 RX MODE
Manually switch to a suitable mode (radio wave type) for the operating frequency band.
1. Press and hold the
FUNC knob

[ 16 RX MODE ]

Press the FUNC knob
2. Rotate the FUNC knob to select the mode.
AUTO Automatically switches the modulation mode to match the
frequency band.
FM Switches to the FM mode.
AM Switches to the AM mode.
17 SUB BAND
The Sub Band display (lower part of the screen) can be hidden. Also, while receiving a
signal on the Main Band, the Sub Band audio can be automatically muted.
1. Press and hold the
FUNC knob

[ 17 SUB BAND ]

Press the FUNC knob
The parameter settings screen appears.
SUB BAND
The Sub Band display is hidden.
1. Rotate the
FUNC knob to select [ SUB BAND ] then Press the FUNC knob.
2. Rotate the FUNC knob to select the desired setting then press the FUNC knob.
OFF The Sub Band (Lower part of the screen) is not displayed.
ON The Sub Band (Lower part of the screen) is displayed.
SUBBAND MUTE
The receive audio of the Sub Band can be automatically muted when receiving signals
in the Main Band.
1. Rotate the
FUNC knob to select [ SUBBAND MUTE ] then press the FUNC knob.
2. Rotate the FUNC knob to select the desired setting.
OFF The Sub Band audio will not be muted when a signal is received on
the Main Band.
ON The Sub Band audio will be muted when a signal is received on
the Main Band.