Yaesu FTM-500DR, Advance Manual

Page: 65 / 74

65
72 DATA SQL
Sets the squelch detection status during APRS (internal modem) operation, and the
output status of the squelch terminal of the “DATA” communications jack on the rear
panel of the transceiver.
1. Press and hold the
FUNC knob

[ 72 DATA SQL ]

Press the FUNC knob
The screen for the detailed settings will be displayed.
APRS
Selects the squelch detection status during APRS operation.
1. Rotate the
FUNC knob to select [ APRS ] then press the FUNC knob.
2. Rotate the FUNC to select the desired setting, then press the FUNC knob.
RX BAND Does not transmit when the receive band squelch is open.
TX/RX BAND Does not transmit when either the receive band or transmit
band squelch is open.
DATA
Sets the output status (during receive) of the PK SQL (squelch control) terminal (6 pin)
on the DATA Jack.
1. Rotate the
FUNC knob to select [ DATA ] then press the FUNC knob.
2. Rotate the FUNC to select the desired setting, then press the FUNC knob.
RX BAND The SQL terminal is active when the receive band squelch
is open.
TX/RX BAND The SQL terminal is active when either the receive band or
the transmit band squelch is open.
TX
Sets the output status (during transmission) of the PK SQL (squelch control) terminal
(6 pin) on the DATA Jack.
Sets whether to activate the SQL terminal while the “DATA” set in the Menu “70 DATA
BAND” is being transmitted.
When set to “ON”, transmission from an external device such as a TNC may be
suppressed while this unit is transmitting in the data band.
1. Rotate the
FUNC knob to select [ TX ] then press the FUNC knob.
2. Rotate the FUNC to select the desired setting, then press the FUNC knob.
ON The SQL terminal becomes active during transmission.
OFF The SQL terminal does not become active during trans-
mission.