![background image](http://html2.mh-extra.com/html/yaesu/ftm-10r/ftm-10r_operating-manual_3212815071.webp)
69
FTM-10R O
PERATING
M
ANUAL
I
NTERNET
C
ONNECTION
F
EATURE
(
WiRES
TM
)
FRG
(
“F
RIENDLY
R
ADIO
G
ROUP
”
)
MODE
You may access other Internet Link Systems (including WiRES
TM
in the “FRG” mode) that
use a DTMF string for access.
Programming the FRG code
Load the DTMF tones that you wish to use for Internet-link access into a DTMF memory
register. For purposes of this example, we will use “#(F)1101D” as the access code (the “#”
key is denoted by the letter “
F
”).
1. Press and hold the [
VOL/SEL
] key for one second to activate the Menu mode.
2. Rotate the
DIAL
knob to select Menu Item “
F13 DTMF
”.
3. Press the
key to enable selection of this Menu Item.
4. Rotate the
DIAL
knob to select the DTMF memory register
(D1 ~ D9) into which you wish to store the access code.
5. Press and hold the
key for one second. The first digit
will blink.
6. Rotate the
DIAL
knob to select “
F
” (representing DTMF
“#” the first digit of the DTMF string).
“E” representing DTMF “*” and “F” representing DTMF
“#”
7. Press the
key momentarily to accept the first digit and
move to the second digit of the DTMF string.
8. Repeat the previous steps until you have completed the ac-
cess code (“# (F)1101D”).
9. If you make a mistake, press the
key to backspace the cursor, then re-enter the
correct number.
10. Press and hold the
key for one second to save the new setting.
11. Repeat steps 1 through 10 to store other access codes, if so desired.
12. Press the [
VOL/SEL
] key to save the setting and exit to normal operation.
Summary of Contents for FTM-10R
Page 113: ...111 FTM 10R OPERATING MANUAL NOTE...
Page 114: ...112 FTM 10R OPERATING MANUAL NOTE...