![background image](http://html2.mh-extra.com/html/yaesu/ftm-10r/ftm-10r_operating-manual_3212815104.webp)
102
FTM-10R O
PERATING
M
ANUAL
I
NSTALLATION
OF
O
PTIONAL
A
CCESSORIES
M
ICROPHONE
J
ACK
“MEK-M10”
1. Remove the four screws securing the
Front Panel and then remove the Front
Panel from the Transceiver Body.
4. Remove the two screws affixing the Mi-
crophone Jack cover, and then remove
the Microphone Jack cover from the
Front Panel.
2. Disconnect the 8-pin modular plug
from the Transceiver.
5. Remove the four screws securing the
Rear Case of the Front Panel and remove
the Rear Case from the Front Panel.
Note
: When you remove the rear case,
you will find a small thin wire near the
flat ribbon cable. Be careful not to cut or
add any stress to this wire. It will be con-
nected in step 7.
3. Remove the screw affixing the Straight
Sub Panel, and then remove the
Straight Sub Panel from the Front
Panel.
Summary of Contents for FTM-10R
Page 113: ...111 FTM 10R OPERATING MANUAL NOTE...
Page 114: ...112 FTM 10R OPERATING MANUAL NOTE...