![background image](http://html2.mh-extra.com/html/yaesu/ftm-10r/ftm-10r_operating-manual_3212815023.webp)
21
FTM-10R O
PERATING
M
ANUAL
N
ON
-S
EPARATE
I
NSTALLATION
The
FTM-10R
front panel may be tilted using the supplied Angle Sub Panel.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
1. Remove the four screws securing the
Front Panel and then remove the panel
from the transceiver body (Figure 1).
2. Disconnect the 8-pin modular plug
from the transceiver (Figure 2).
3. Remove the screw affixing the Straight
Sub Panel, and then remove the
Straight Sub Panel from the Front Panel
(Figure 3).
4. Attach the supplied Angle Sub Panel
to the Front Panel, using the previously
removed screw (Figure 4).
You may set this up in a “look-up” or
“look-down” configuration depending
on the mounting position of the Sub
Panel.
5. Connect the 8-pin modular plug to the
transceiver’s body.
6. Attach the Front Panel (with Angle Sub
Panel) to the transceiver’s body, using
the previously removed four screws
(Figure 5).
I
NSTALLATION
Summary of Contents for FTM-10R
Page 113: ...111 FTM 10R OPERATING MANUAL NOTE...
Page 114: ...112 FTM 10R OPERATING MANUAL NOTE...