![background image](http://html2.mh-extra.com/html/yaesu/ftm-10r/ftm-10r_operating-manual_3212815062.webp)
60
FTM-10R O
PERATING
M
ANUAL
Installation of the optional
BU-1
Bluetooth
®
Adapter Unit will enable, the
FTM-10R
to
send/receive voice messages with the optional
BH-1
Bluetooth
®
Headset via wireless
links.
Pairing
When using the
Bluetooth
®
Headset for the first time, the
Bluetooth
®
Headset and the
FTM-10R
must be paired.
P
Bring the
Bluetooth
®
Headset and the
FTM-10R
close together when doing Pairing.
1. Turn the transceiver off.
2. Press and hold the [
VOL/SEL
] key while turning the power on again.
3. Rotate the
DIAL
knob to select the
Bluetooth
®
Adapter Unit you wish to pair.
Main Chassis
Bluetooth
®
Adapter Unit:
Menu Item “
SF6 BLTH R
”
Front Panel
Bluetooth
®
Adapter Unit:
Menu Item “
SF7 BLTH F
”
Bluetooth
®
O
PERATION
4. Press the
PTT
key.
The default PIN code (
6111
) appears.
You may change the PIN code, if desired, before continu-
ing with step 5.
1. Press the
PTT
key, and then rotate the
DIAL
knob to set the first digit of the PIN
code.
2. Press the
key to save the first digit of the PIN code and move on to the next
place.
3. Repeat the previous steps to complete the PIN code. If you make a mistake, press the
key to move back to the incorrect number, then re-enter the correct number.
5. Make sure that the
BH-1
is off.
6. Press and hold the power switch on the
BH-1
Bluetooth
®
Headset for five seconds,
until the
BH-1
’s indicator blinks red/blue alternately.
7. Press the
PTT
key on the
FTM-10R
to initiate the pairing.
8. If the pairing is successful (Requires a 20 to 30 seconds), “
LINK OK
” notation will
appear on the display. The
FTM-10R
will turn off and back on again.
When the
BH-1
Bluetooth
®
Headset is correctly recognized by the
FTM-10R
, the
BH-1
’s indicator will blink blue.
Summary of Contents for FTM-10R
Page 113: ...111 FTM 10R OPERATING MANUAL NOTE...
Page 114: ...112 FTM 10R OPERATING MANUAL NOTE...