Yaesu FTM-100DR, Operating Manual

Page: 29 / 176

29
In
s
ta
lla
tio
n
a
n
d
C
o
n
n
e
c
tio
n
Connecting the power supply
(2) Connecting the power supply cable
Cautions
Do not use a DC power supply cable other than the one that is supplied or specified.
Do not place anything on the DC power supply cable or step on it.
Do not use the DC power supply cable with the fuse holder cut off.
Do not reverse the polarity (positive and negative) when connecting the battery.
1
This prevents short-circuit while working on the cables.
2
Attach crimped terminals to the bare ends of the DC power supply cable.
Obtain commercially available terminals and crimp or solder them to both the red (+)


 
3
Connect the red wire (+) of the DC power supply cable to the positive (+) terminal of
the battery.
Caution Securely connect the DC power supply cable in order not to get disconnected.
4
5
of the battery.
Caution Securely connect the DC power supply cable in order not to get disconnected.
6
Connect the DC power supply cable to the main body.
Plug into the connector of the main body power cable until it clicks.








